From Concept to Scalable Hardware - We Engineer Products That Perform

We design, prototype, and scale hardware—from PCBs and enclosures to fully integrated IoT devices. Our team helps startups and enterprises build products that are robust, efficient, and ready for manufacturing.

Trusted by Industry Leaders

Why Leading Innovators Choose Epteck for Hardware & Product Design

Epteck combines electrical, mechanical, and embedded systems expertise to create products that are reliable, secure, and ready for manufacturing. Whether you’re building a new prototype or scaling to global production, we deliver smart, future-proof hardware that performs under pressure.

End-to-End Expertise

From schematics to prototyping to DFM, we guide your product through every development stage.

Engineering Built for Scale

We design with manufacturability, cost optimization, and global sourcing in mind from the start.

Rapid Iteration & Validation

Fast, high-quality prototyping backed by in-house test engineering and iterative design feedback loops.

Designed for Safety & Compliance

EMC, CE, mechanical, thermal—our designs are aligned with regulatory and reliability requirements.

Collaborative, Transparent Process

Field failures, firmware bugs, and missed certifications are expensive. We help you mitigate that risk upfront through real testing, not guesswork.

From Schematics to Scalable Solutions

We bring together electrical, mechanical, and system-level design into one streamlined process—whether you’re building a connected sensor, an embedded controller, or a full-scale commercial product. Our engineering services are designed to accelerate development while reducing complexity and cost.

Our team designs reliable, manufacturable circuit boards for embedded and IoT systems—optimized for performance, power, and cost.

  1. Schematic & PCB layout design (Altium, KiCad)
  2. Component selection, BOM optimization
  3. High-speed signal design, EMI/EMC planning

We create robust, aesthetic, and production-ready mechanical designs for devices that need to perform under real-world stress.

  1. 3D enclosure design (CAD)
  2. Thermal & structural analysis
  3. Integration with PCBs, sensors, and connectors

We build and test early-stage hardware quickly, allowing you to validate designs, gather feedback, and iterate fast—without costly delays.

  1. Rapid prototyping and 3D printing
  2. PCB assembly (SMD/TH)
  3. Bench testing, iteration loops, failure analysis

Our team leads the full product design lifecycle—from initial specs to pre-production readiness—ensuring every component works together perfectly.

  1. Cross-discipline system integration
  2. Design for manufacturability (DFM/DFT)
  3. Product documentation & test plans

We help you go from a single working prototype to a scalable, cost-efficient production run—without redesign headaches or surprises.

  1. Manufacturing support (EMS handoff, tooling files, etc.)
  2. DFM feedback, production test jig design
  3. BOM validation & sourcing advisory

Hardware That Performs in the Real World

From startups building their first connected devices to global manufacturers scaling to mass production, Epteck has delivered tangible value through smart, scalable hardware design. Here’s a look at how we’ve helped companies bring innovative products to life—on time, on spec, and on budget.

Smart Sleep Trainer

Challenge: Compliance with CE/GPSR safety standards for consumer health device

Solution: QA protocol development, hardware stress testing, test report packaging

Result: CE/GPSR compliance achieved in record time with no required retest

Energy Monitoring Hub

Challenge: Complex 3-phase metering design with thermal constraints and space limits.

Solution: Dual-layer PCB, thermal modeling, compliance-ready design, and test automation.

Result: 2x faster time-to-certification and 35% lower power draw.

Have a project you need to bring to life? Let’s explore how we can support your hardware roadmap.
“Epteck helped us pass CE/EMC testing on the first attempt—while tightening our firmware reliability across the board.”

⭐⭐⭐⭐⭐
Bryan D

CEO

Odie

Netherlands

Built Differently to Build Better Hardware

At Epteck, we don’t just design boards or enclosures—we engineer entire product ecosystems that scale. With a cross-functional team and proven results, we help clients bring robust, cost-effective, and compliant products to life—without compromise.

Cross-Disciplinary Product Engineering

We combine electrical, mechanical, embedded, and system engineering under one roof. This ensures your hardware is optimized across every layer—from power delivery and thermals to enclosure fit and manufacturability.

Built for Scale Not Just Prototypes

Our designs are engineered with DFM (Design for Manufacturability), DFT (Design for Test), and long-term component sourcing in mind. From first build to mass production, we reduce risk, rework, and cost at every stage.

Regulatory &
Compliance Ready

We design hardware that aligns with CE, EMC, GPSR, and safety regulations right from the start. Our experience with regulated industries helps accelerate testing, reduce redesigns, and ensure smoother certification.

Real Engineering Expertise, Not Guesswork

Our team is made up of senior hardware engineers, test engineers, and product designers with deep experience in mission-critical applications—from smart energy to industrial IoT.

Fast Iteration Without Sacrificing Quality

With in-house prototyping support and agile sprint cycles, we can help you go from design to testable hardware in weeks—not months—while maintaining rigorous validation standards.

Transparent, Collaborative Process

We work closely with your in-house teams and stakeholders using shared documentation, version-controlled CAD & schematics, and real-time communication tools to ensure alignment every step of the way.

Insights, Resources & Engineering Know-How

Explore guides, tutorials, and expert resources designed to help you reduce risk, improve product quality, and scale your hardware with confidence. Learn from the real-world challenges and solutions we’ve delivered across industries.
Hardware & Product Design

Design for Manufacturability (DFM): A Hardware Engineer’s Checklist

Hardware & Product Design

How to Prepare Your Product for EMC Compliance Testing

Hardware & Product Design

Rapid Hardware Prototyping in a Lean Development Cycle

SEMRISE offers high-precision energy monitoring that delivers real-time insights and robust protection for your industrial and commercial power systems. Experience advanced analytics and seamless connectivity designed to optimize energy usage and
Hardware & Product Design

Mechanical Design for Embedded Devices: Best Practices & Pitfalls

SEMRISE offers high-precision energy monitoring that delivers real-time insights and robust protection for your industrial and commercial power systems. Experience advanced analytics and seamless connectivity designed to optimize energy usage and

Hardware & Product Design

How to Choose the Right Connectors for Harsh Environments

Today, over 90% of organizations depend on open-source software (OSS) within their applications. OSS powers much of…
Hardware & Product Design

Why Your Enclosure Fails in Real-World Thermals (and How to Fix It)

Mender is an open-source, over-the-air (OTA) update manager for IoT and embedded Linux devices. Its client-server architecture…

Let’s Secure Your Product’s Path to Market

Whether you’re preparing for CE certification, troubleshooting firmware bugs, or strengthening your secure boot process, our team is here to help. Talk to Epteck’s QA and compliance engineers to assess your product and explore the smartest next steps.

Pick a slot

We will connect you with our best Solutions Architect to make sure your project is delivered on time!

  • 01 Share your requirements
  • 02 Discuss them with our experts
  • 03 Get a free quote
  • 04 Start the project

Powered By WordPress